42110 - (MILD STEEL) 1/8 in 7014 10 lb
Description: A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on AC or DC (straight or reverse polarity) welding current.
Light to medium penetrating, all purpose electrode.
Use where higher deposition rates & faster travel speeds are required.
For heavy sheet metal.
Smoother, fine-rippled bead appearance.
$43.55

32150 - 7014 WELDING ROD (MILD STEEL) 1/8" 50 LB
Description: A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on AC or DC (straight or reverse polarity) welding current.
Light to medium penetrating, all purpose electrode.
Use where higher deposition rates & faster travel speeds are required.
For heavy sheet metal.
Smoother, fine-rippled bead appearance.
$97.56

42205 - (MILD STEEL) 5/32 in 7014 5 lb
Description: A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on AC or DC (straight or reverse polarity) welding current.
Light to medium penetrating, all purpose electrode.
Use where higher deposition rates & faster travel speeds are required.
For heavy sheet metal.
Smoother, fine-rippled bead appearance.
$23.31

32250 - 7014 WELDING ROD (MILD STEEL) 5/32" 50 LB
Description: A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on AC or DC (straight or reverse polarity) welding current.
Light to medium penetrating, all purpose electrode.
Use where higher deposition rates & faster travel speeds are required.
For heavy sheet metal.
Smoother, fine-rippled bead appearance.
$93.49

42285 - MIG WIRE .023 dia. 10 lb SPOOL (E70S-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$48.06

Click Larger

42286 - MIG WIRE .030 dia. 10 lb SPOOL (E70S-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$44.98

42287 - MIG WIRE .035 dia. 10 lb SPOOL (E7OS-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$34.09

Click Larger

42290 - MIG WIRE .023 dia. 2 lb SPOOL (E70S-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$13.19

42291 - MIG WIRE .030 dia. 2 lb SPOOL (E70S-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$12.09

Click Larger

42292 - MIG WIRE .035 dia. 2 lb SPOOL (E70S-6 MILD STEEL)
Description: High strength mild steel mig wire. E70S-6.
Ideal for auto body repair and light fabrication on most thin metals.
Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel.
Produces a smoother bead which requires less grinding.
Argon CO2 mix shielding gas required.
Use DCEP reverse polarity.
70,000 PSI tensile strength.
$11.43

Click Larger

42300 - MIG WIRE .030 dia. 2 lb SPOOL FLUX CORE
(E71-TGS MILD STEEL)
Description: Self shielded mild steel mig wire E71T-GS.
Self shielding all position flux cored welding wire.
Single pass applications.
Excellent for use on thin metal.
High travel speed.
Low spatter.
No shielding gas required.
70,000 PSI Tensile strength.
Use DCEN straight polarity.
$21.99

42301 - MIG WIRE .030 10 lb SPOOL FLUX CORE
(E71-TGS MILD STEEL)
Description: Self shielded mild steel mig wire E71T-GS.
Self shielding all position flux cored welding wire.
Single pass applications.
Excellent for use on thin metal.
High travel speed.
Low spatter.
No shielding gas required.
70,000 PSI Tensile strength.
Use DCEN straight polarity.
$87.99

Click Larger

42302 - MIG WIRE .035 2 lb SPOOL FLUX CORE
(E71-TGS MILD STEEL)
Description: Self shielded mild steel mig wire E71T-GS.
Self shielding all position flux cored welding wire.
Single pass applications.
Excellent for use on thin metal.
High travel speed.
Low spatter.
No shielding gas required.
70,000 PSI Tensile strength.
Use DCEN straight polarity.
$19.79

42303 - MIG WIRE .035 10 lb SPOOL FLUX CORE
(E71-TGS MILD STEEL)
Description: Self shielded mild steel mig wire E71T-GS.
Self shielding all position flux cored welding wire.
Single pass applications.
Excellent for use on thin metal.
High travel speed.
Low spatter.
No shielding gas required.
70,000 PSI Tensile strength.
Use DCEN straight polarity.
$82.49

Click Larger

42801 - HEAVY ABRASION SUPERWEAR 5/32" 1 lb BOX
Description: For High Pressure High Impact with Medium Abrasion.
A truly unique electrode combining unsurpassed weldability plus super impact and abrasion resistance and high hardness. It is the ideal alloy combination where hardness and toughness are required on carbon and alloy steels, manganese steels, and cast iron. Deposits are heat treatable.
Typical Applications: Crusher jaws, Hammers, Bucket lips and teeth, Wear plates, Pins, Axles, Shafts, Cam eccentrics.
Hardness: RC 56-60
DC reverse polarity or AC
Recommended amperage: 160-200.
$22.43

Click Larger

43400 - NOMACAST HARD CAST IRON ELECTRODE 1/8" 1/2 lb
Description: Non-machinable joins cast to other metals. Non-conductive flux coating. Specially developed for welding dirty, heat affected, contaminated and oxidized cast iron. For all cast iron repair welding not requiring machinable weld metal. Will bond to severely contaminated or oxidized cast iron surfaces due to its combination of arc drive, flux coating and weld metal combination. Ideally suited to the cladding of heat oxidized or oil impregnated castings, prior to joining with high nickel alloys. Use also for welding broken cast iron where machinability of the weld is not required.
Typical applications: Ideal for base machines, structures such as pedestals, frames, housings, and casting shapes of all types. Use also for joining cast iron to steel and for repairing holes in large castings.
Tensile Strength: 62,000 PSI
Hardness: Rockwell C39.
Recommended Amperage: Use DC reverse or straight polarity, or AC.
70-125 AMPS.
$7.36

Click Larger

43401 - NOMACAST HARD CAST IRON ELECTRODE 1/8" 1 lb
Description: Non-machinable joins cast to other metals. Non-conductive flux coating. Specially developed for welding dirty, heat affected, contaminated and oxidized cast iron. For all cast iron repair welding not requiring machinable weld metal. Will bond to severely contaminated or oxidized cast iron surfaces due to its combination of arc drive, flux coating and weld metal combination. Ideally suited to the cladding of heat oxidized or oil impregnated castings, prior to joining with high nickel alloys. Use also for welding broken cast iron where machinability of the weld is not required.
Typical applications: Ideal for base machines, structures such as pedestals, frames, housings, and casting shapes of all types. Use also for joining cast iron to steel and for repairing holes in large castings.
Tensile Strength: 62,000 PSI
Hardness: Rockwell C39.
Recommended Amperage: Use DC reverse or straight polarity, or AC.
70-125 AMPS.
$12.09

44556 - STAINLESS STEEL 312-16 3/32" 1/2 lb
Description: STAINLESS STEEL ELECTRODE ALLOY 312-16.
For welding all steels. The absolute ultimate computer-engineered, high alloy electrode for welding every known grade of steel using every known stick electrode power source. The first truly AC-DC mineral coated high alloy that can be used by anyone, regardless of prior welding experience. Superior combination of tensile strength and elongation. Arc so ionized, you cannot short it out.
Typical Applications: Horizontal fillet welds in all grades of construction steels. Weld every known grade of tool steel, including pre-hardened types. Join abrasion-resisting steels, Hadfield, and other austenitic manganese steels. Join heat & corrosion resisting steels. Many specialized iron-base castings with high carbon contents. Tools and dies of all types.
Tensile Strength: 128,000 PSI
Elongation: 32%
Recommended Amperage: use any AC or DC constant current power source designed for stick welding. On DC, use reverse polarity.
35-70 amps
$17.26

Click Larger

44557 - STAINLESS STEEL 312-16 3/32" 1 lb
Description: STAINLESS STEEL ELECTRODE ALLOY 312-16.
For welding all steels. The absolute ultimate computer-engineered, high alloy electrode for welding every known grade of steel using every known stick electrode power source. The first truly AC-DC mineral coated high alloy that can be used by anyone, regardless of prior welding experience. Superior combination of tensile strength and elongation. Arc so ionized, you cannot short it out.
Typical Applications: Horizontal fillet welds in all grades of construction steels. Weld every known grade of tool steel, including pre-hardened types. Join abrasion-resisting steels, Hadfield, and other austenitic manganese steels. Join heat & corrosion resisting steels. Many specialized iron-base castings with high carbon contents. Tools and dies of all types.
Tensile Strength: 128,000 PSI
Elongation: 32%
Recommended Amperage: use any AC or DC constant current power source designed for stick welding. On DC, use reverse polarity.
35-70 amps
$29.36

44559 - Stainless Steel "Easy-All" 312-16 Welding Alloy (1/8" x 1/2 lbs / 226.8 g)
Description: Stainless Steel Easy-All 312-16 Alloy. 1/8" x 1/2 lbs / 226.8 g. Tensile strength: 128,000 PSI. Recommended amperage: 60 - 110 amps AC or DC constant current, reverse (+) polarity for DC. Absolute best electrode for welding most grades of steel with most stick electrode power sources. Weld construction and pre-hardened tool steels, and specialized iron-base castings w/ high-carbon contrent. Mineral coated high-alloy steel that can be used by anyone - regardless of experience.
$15.17

Click Larger

44560 - Stainless Steel "Easy-All" 312-16 Welding Alloy (1/8" x 1/2 lbs / 226.8 g)
Description: Stainless Steel Easy-All 312-16 Alloy. 1/8" x 1/2 lbs / 226.8 g. Tensile strength: 128,000 PSI. Recommended amperage: 60 - 110 amps AC or DC constant current, reverse (+) polarity for DC. Absolute best electrode for welding most grades of steel with most stick electrode power sources. Weld construction and pre-hardened tool steels, and specialized iron-base castings w/ high-carbon contrent. Mineral coated high-alloy steel that can be used by anyone - regardless of experience.
$26.94